Standard Issue Tee
Pocket-free base tee so a rig or sling lies flat. Pair with Location Cargo or the sling for storage; compare seam pressure under a loaded strap.
Every piece at work
28 product studies from a working day. See the fit, the hand at the pocket or closure, and the garment in motion. Tap a frame to enlarge it.
Generated concepts. Check construction and pocket dimensions against the product specification when reviewing a sample.
Clothing
Long Shift Tee
Pocket-free underlayer with inset cuffs. Carry small items in the trouser instead of putting a hard object against the chest under a harness.
Floor Polo
Flat internal 85 × 110 mm pass sleeve at the lower side seam with an overlapping lip. Intended for a pass or folded note; phones go in the trouser.
Utility Shirt
Diagonal 115 × 145 mm chest welt with recessed zip for a small notebook or soft pouch. Add a short internal pen channel; reach across the body while kneeling.
Rig Overshirt
Under the chest flap, a 145 × 170 mm flat map pocket and a separate 25 mm pencil channel. Recessed zip and secured flap; try with a shoulder strap and when reaching overhead.
Monsoon Shell
Two hand pockets above the waist belt, with covered zips and drain paths away from the lining. One internal dry-change note sleeve; confirm leakage before storing anything moisture-sensitive.
Utility Short
One 100 × 175 mm diagonal thigh welt for a phone and two deep hand pockets. Zip pull parks flat. Place the phone above and outside the knee crease when crouched.
Location Cargo
Two inset pleat thigh pockets with flush closures. One 100 × 175 mm inner phone sleeve prevents bounce; opposite side takes tape or marker in short dividers. Verify access while kneeling without loading the knee.
Floor Trouser
Angled 100 × 175 mm zipped phone pocket forward of the side seam, plus two hand pockets. Shift the pocket away from the seat crease so the phone stays reachable at a monitor.
Double Knee Trouser
Reinforced side sleeve for a marker or enclosed tool holder; short internal tether point designed to be stowed. Front hand pockets close flat and nothing rigid sits over the knee panel.
Rain Overtrouser
Covered pass-throughs to the inner trouser pockets, with no open exterior pouch. Check reach with the shell on and test flap leakage and ankle closure separately.
Location Cap
No storage on the head. Adjustment tail tucks into the back band and the underside of the brim stays matte.
Heat Short
Flush 100 × 175 mm outer-thigh zip pocket with a soft phone sleeve, deep hand pockets and a flat inner pass pocket. Check hand access and thigh pressure while seated, walking and squatting.
Air Trouser
Flush 100 × 175 mm thigh phone pocket and paired hand pockets. Keep the mesh-backed vents separate from storage so a loaded pocket does not block airflow.
Quiet Shirt
Boom Operator / First Assistant Sound
Flat internal 100 × 130 mm soft pocket with overlapping entry. No hook-and-loop on the pocket. Compare noise with a soft control shirt beside the actual boom.
Shift Sock
No carry feature. Low bulk at toes and ankle preserves slip-on fit; compare damp friction, bunching and heel lift against crew members’ usual socks.
Footwear
Floor Slip-On
Covered stretch instep and enclosed heel keep the entry tidy. Trial heel hold with thin and padded socks; check whether the insole stays flat when taking the shoe off.
Location Pull-On Boot
Recessed stretch gores and short captive heel loop. Check trouser hem overlap, heel retention and clearance where work requires other approved footwear.
Closed Toe Slip-On
Enclosed heel, fixed stretch instep and ventilated upper. Use only on allowed low-risk routes; no exposed fastening tail or storage on the upper.
Bags
Runaround Sling
Angled zip opens towards the wearer. Internal 100 × 175 mm phone sleeve, separate pass pocket and short key keeper; verify contents stay inside during a quick opening.
Unit Daypack
Suspended sleeve sized from a measured device, quick-access top pocket, and separate wet-change pouch. Stow strap tails; use proper equipment cases for protected camera or battery transport.
Floor Waist Pack
Radio Mic Technician / Second Assistant Sound
Centre 165 × 95 mm phone pocket, one side pass pocket and one isolated key bay. Belt tail is captive. Test on either hip and crossbody without stacking a second loaded belt.
Continuity Folio
A5 pad bay, an enclosed pen channel, flat reference-card slip and captive hand strap. Zipped perimeter prevents papers slipping when the folio is moved.
Dry Kit Rolltop
12 L usable target after closure is rolled. Removable sleeve keeps a damp outer layer apart from the dry change; trial liquid transfer between the compartments and through the seams.
Equipment
Camera Utility Pouch
Padded 170 × 120 × 50 mm outer target with two inward sleeves for labeled small cases and a separate zip front. Belt mount keeps it tight to the hip. Check actual internal dimensions after padding.
Grip Gloves
Segmented palm leaves fingers free for permitted dexterity tasks. Flat wrist closure with captured end. Use only when gloves suit the task and keep them clear of moving equipment.
Standby Apron
Three inward sleeves for capped tools or brushes, two removable inserts for clean and used items and an enclosed compartment for an approved sharps holder. Fit holders and inserts with each department.
Comms Holster
Radio-specific body pocket with captive top retention; channel guides cable back toward the body. Measure radio with battery fitted and check PTT and dial access from either hip.